GENM pumps are self-priming with bronze bodies and impellers. With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red dieselâ€), bio-fuel, transformer oil and mild chemicals.
GENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton® is available at extra cost). The IP44 motors have a forward and reverse switch for filling and emptying duties. They are also available in 3 phase as ENT pumps.
They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension. Maximum recommended suction lift, with a foot valve, is 6 metres.
These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.
However, they must not pump white diesel, petrol, solvents or products with a low flash point.
https://www.rainwatersolutions.co.uk/genm-20-110v-pump?___store=rainwater_solutions_store_view1249GENM-20 110v Pumphttps://www.rainwatersolutions.co.uk/media/catalog/product/g/m/gmenm_2.jpg190.25190.25GBPInStock/Pumps/Pumps/Rainwater Pumps/Accessories/Pumps/Self Priming Rainwater Tank Pumps/Rainwater Harvesting/Commercial Irrigation/Garden/Water Butts/Accessories/Pumps/Rainwater Harvesting/Domestic Rainwater Systems/Garden/Water Butts/Accessories/Water Butts/Water Butt Accessories/Water Butts/Water Butt Accessories/Water Butt Pumps/Pumps/Pumps/Rainwater Pumps/Pumps/Pumps/Self Priming Service Pumps/Pumps/PumpsGENM pumps are self-priming with bronze bodies and impellers. With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red dieselâ€), bio-fuel, transformer oil and mild chemicals. <p>GENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton® is available at extra cost). The IP44 motors have a forward and reverse switch for filling and emptying duties. They are also available in 3 phase as ENT pumps.</p>
<p>They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension. Maximum recommended suction lift, with a foot valve, is 6 metres.</p>
<p>These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.</p>
<p>However, they must not pump white diesel, petrol, solvents or products with a low flash point.</p><p></p><table style="width: 388px; height: 409px;" border="0">
<tbody>
<tr>
<td><strong>Outlet (mm)</strong></td>
<td>20</td>
</tr>
<tr>
<td><strong>kW</strong></td>
<td>0.37</td>
</tr>
<tr>
<td><strong>Volts</strong></td>
<td>110V</td>
</tr>
<tr>
<td><strong>Flow (l/min)</strong></td>
<td>35</td>
</tr>
<tr>
<td><strong>Head (metres)</strong></td>
<td>27</td>
</tr>
<tr>
<td><strong>Inlet (mm)</strong></td>
<td>25</td>
</tr>
<tr>
<td><strong>Width (mm)</strong></td>
<td>120</td>
</tr>
<tr>
<td><strong>Length (mm)</strong></td>
<td>248</td>
</tr>
<tr>
<td><strong>Height (mm)</strong></td>
<td>190</td>
</tr>
<tr>
<td><strong>Dry weight (kg)</strong></td>
<td>5.9</td>
</tr>
<tr>
<td><strong>Packing weight (kg)</strong></td>
<td>6.40</td>
</tr>
</tbody>
</table>00https://www.rainwatersolutions.co.uk/media/catalog/product/g/e/genm-flow-chart_4.jpgadd-to-cartBlue191224.86.411035
