Fine Mesh Insert for Gutter Mate Diverter and Filter (Original)
Available for both the Original Gutter Mate Diverter & Filter Original & Current Gutter Mate 2. If you have the Original Gutter Mate it will have a 90 degree elbow which pushes into the diverter outlet on the bottom of the filter body. The Gutter Mate 2 has no elbow and the length of the diverter outlet is the same as the main outlet.
Why choose the Filter Basket for Gutter Mate:
- Specially made by experianced designers for the best possible outcome.
- Designed to filter your rainwater and collect debri to clean your gutters and pipes.
- Please check our YouTube video on how to remove the product when needed.
- A no brainer as its made from 100% recycled plastic and stops any expensive blockages.
Provides a higher degree of rain water filtration (800 micron).
PLEASE NOTE: Two Fine Mesh Inserts for the Gutter Mate Diverter and Filter only. Filter basket and Gutter Mate sold separately.
Fine Mesh Insert for the GutterMate Diverter & Filter
We have 2 sets of FMI. One for the Gutter Mate Original and one for the Gutter Mate 2.
To identify which Gutter Mate you have you can do this without taking apart the filter.
On the Original Gutter Mate, the diverter outlet finishes with a 90 degree bend onto which the connecting hose is fitted. If you have this filter you need to order a FMI set for the Original Gutter Mate.
The Gutter Mate 2 is identified as follows. The diverter outlet is the same length as the main outlet on the filter, there is no bend. Also on the Gutter Mate 2 body, approximately 25mm from the bottom of the body there is an annular ring which has no gloss finish, around the body, this represents the maximum water level in the water butt. On the white GM it is more difficult to see this annular ring.
The Benefits of Fine Mesh Inserts are:
- Saves buying another filter
- The degree of filtration is increased more than 20 fold when inserted into filter basket. Up to 800 micron.
- Easy to fit
- Easy to clean
- Low cost solution to filtration of rainwater
- Good solution if water needed for use in pressure washer
- Good solution if using the rain water for car washing
- Toilet flushing with rainwater.
- Barrier to insects
- Can be fitted in seconds
Which Fine Mesh Insert do I order?
If you have the Original Gutter Mate it will have a 90 degree elbow which pushs into the diverter outlet on the bottom of the filter body. The Gutter Mate 2 has no elbow and the length of the diverter outlet is the same as the main outlet.